Collectors for transportation and storage of corrosive liquids


Are intended for transportation of acids (including accumulator), alkalis and other liquids by motor transport. Are produced in volume from 0.4 to 4 m3. Collectors are equipped with a jacket for heating the liquid when unloading and protecting the hull from impact, a protective cover on the lid, load-lifting devices.

 

Collectors for transportation of aggressive liquids steel enamelled without a shirt

 

 

Symbol Working volume, m3 Weight of the collection, kg Overall dimensions, mm
height, Н width, L
Collection СЕТв 3,2-31-12-01 3,2 2040 1950 2100
Collection СЕТв 4,0-31-12-01 4,0 2700 2600 2100

Collectors for transportation of aggressive liquids steel enamelled with a jacket

Working pressure MPa (kgf/cm2)
in the case: during transportation and storage - up to 0,07 (0,7);
at emptying - up to 0,3 (3,0);
in a shirt: during transportation and storage - atmospheric;
when emptying 0,2 (2,0);
Permissible wall temperature, °С:
in the case: during transportation and storage - from minus 30 to plus 70;
when emptying - from minus 10 to plus 70;
in a shirt: during transportation and storage - from minus 30 to plus 70;
when emptying - from minus 10 to plus 70

 

Symbol Working volume, m3 Shirt volume, m3 Weight of the collection, kg Overall dimensions, mm Area of heat exchange, m2
height, Н width, L
ССЕТрв 0,4-4-12 0,4 0,084 680 1400 1200 2,2
ССЕТрв 0,63-4-12 0,63 0,122 950 1610 1300 2,7
ССЕТрв 1,0-2-12-01 1,0 0,21 1140 1925 1420 3,5

Product сatalog:

Capacitive equipment
- Underground horizontal drainage tanks
- Double walled basins
- Air collectors for compressor plants
- Containers for liquefied gases of propane and butane
- Deaeration tank of atmospheric pressure
- Drum Separators
- Containers for odorant storage
- Containers for transportation and storage of ammonia
- Container for storage and transportation of chlorine - Percolators

Equipment for oil and gas pipelines
- Start-up (reception) chambers of means for cleaning and diagnostics of oil and gas pipelines
- Filters liquid mesh type MDL
- Filters for dirt traps
- Details of welded steel pipes
- Flare for burning associated gas

Oil and gas separators
- Oil and gas separators with water discharge
- Oil and gas separators for degassing
- Flare separators
- Gas separators mesh

Heat exchanging equipment
- Shell-and-tube heat exchangers with a floating head
- Heat exchangers with fixed tube grids and temperature compensator
- Heat exchangers with a floating head and U-shaped tubes
- Thermosilphone evaporators with fixed tube grids and temperature compensator
- Vacuum capacitors with fixed tube grids and temperature compensator
- Pipe bundles
- Apparatus for air cooling oil

Enamel equipment
- Apparatuses with mechanical stirring device
- Apparatuses - thermosimulators
- Collections steel enameled
- Collectors for transportation of aggressive liquids
- Collector-akratofory
- Apparatuses (bowls) evaporated steel enameled
- Heat exchangers such as "pipe in pipe"
- Heat exchangers of the "vessel in a vessel" type
- Filters steel enameled under vacuum (NUTC filters)
- Filters steel enamelled under pressure (FRC filters)
- Capacitive filter with rising stirring device
- Dish-washing machine, enameled, drum type
- Column apparatuses
- Steel framework enamelled

Mixing equipment
- Chemical reactors with agitating device
- Industrial Mixers
- Faucets with Z-shaped blades