Oil and gas separators for degassing

Oil and gas separators are designed for degassing of non-foam oil and cleaning associated gas, they are used in installations for gathering and preparing oil products. The design provides separators types I and II
Type I - are intended for use in the arrangement with the gas pre-selection units (by the pulsators)
Type II - designed for use without gas pre-selection units.


Separators type NGS, internal diameter 1200 mm and 1600 mm

Options Code of apparatus
Н
Г
С
0.6-
1200
Н
Г
С
1.0-
1200
Н
Г
С
1.6-
1200
Н
Г
С
2.5-
1200
Н
Г
С
4.0-
1200
Н
Г
С
6.3-
1200
Н
Г
С
0.6-
1600
Н
Г
С
1.0-
1600
Н
Г
С
1.6-
1600
Н
Г
С
2.5-
1600
Н
Г
С
4.0-
1600
Н
Г
С
6.3-
1600
Inside diameter, mm 1200 1600
Volumetric productivity for oil, m3/h 20-100 45-225
in gas, m3/h 20700 23300 31400 39000 55000 74900 41400 46700 62900 78000 11000 149500
Pressure, MPa Working Р 0,4 0,8 1,4 2,2 3,6 5,7 0,4 0,8 1,4 2,2 3,6 5,7
Estimated Рр 0,6 1,0 1,6 2,5 4,0 6,3 1,0 1,6 2,5 4,0 6,3
Trial during hydraulic testing Рпр 0,7 1,2 1,9 3,0 4,7 7,3 0,7 1,2 1,9 3,0 4,7 7,3
Temperature, °С working environment t от 0 до 100
design wall tp 100
the minimum permissible wall of the apparatus under pressure, tmin for apparatus made of steel 16ГС - to minus 30, of steel 09Г2С - from minus 30 to minus 60
Environment, characteristics of the environment oil, associated gas
Hazard Class - 2
explosion category and group - IIA-T3
Liquid entrainment with gas, g/m3 to 0,1
The entrainment of free gas by liquid, % to 1
Corrosion additive, мм 2
Nominal volume 6,3 12,5
Group of apparatus for monitoring welded joints 1
Service life, years 20

Product сatalog:

Capacitive equipment
- Underground horizontal drainage tanks
- Double walled basins
- Air collectors for compressor plants
- Containers for liquefied gases of propane and butane
- Deaeration tank of atmospheric pressure
- Drum Separators
- Containers for odorant storage
- Containers for transportation and storage of ammonia
- Container for storage and transportation of chlorine - Percolators

Equipment for oil and gas pipelines
- Start-up (reception) chambers of means for cleaning and diagnostics of oil and gas pipelines
- Filters liquid mesh type MDL
- Filters for dirt traps
- Details of welded steel pipes
- Flare for burning associated gas

Oil and gas separators
- Oil and gas separators with water discharge
- Oil and gas separators for degassing
- Flare separators
- Gas separators mesh

Heat exchanging equipment
- Shell-and-tube heat exchangers with a floating head
- Heat exchangers with fixed tube grids and temperature compensator
- Heat exchangers with a floating head and U-shaped tubes
- Thermosilphone evaporators with fixed tube grids and temperature compensator
- Vacuum capacitors with fixed tube grids and temperature compensator
- Pipe bundles
- Apparatus for air cooling oil

Enamel equipment
- Apparatuses with mechanical stirring device
- Apparatuses - thermosimulators
- Collections steel enameled
- Collectors for transportation of aggressive liquids
- Collector-akratofory
- Apparatuses (bowls) evaporated steel enameled
- Heat exchangers such as "pipe in pipe"
- Heat exchangers of the "vessel in a vessel" type
- Filters steel enameled under vacuum (NUTC filters)
- Filters steel enamelled under pressure (FRC filters)
- Capacitive filter with rising stirring device
- Dish-washing machine, enameled, drum type
- Column apparatuses
- Steel framework enamelled

Mixing equipment
- Chemical reactors with agitating device
- Industrial Mixers
- Faucets with Z-shaped blades